information for DC system

"Features and Specifications  Simulated blocks – configurable as 1st, 2nd and 3rd order systems with negative feedback.  Forward gain adjustable through a calibrated 10 turn potentiometer (Resolution 1 in 1000).  Three built-in signal sources  Square wave : 1 V p-p (min).  Triangular wave : + 0.5 V p-p (min).  Trigger pulses : + 10 V (min).  Frequency adjustable : 40 Hz – 90 Hz.  Provision for disturbance inputs at input and load.  I.C. regulation in all internal power supplies.  Power requirement less than 10W at 220 V, 50 Hz operation.  Supporting literature and patch cords included.  Complete with Measuring Device as given below Technical Specifications Bandwidth -50 MHz Rise Time (at input, typical) - ≤ 7 ns Power Supply -100 V to 240 V AC, 50/60 Hz, CAT II Power Consumption -< 15 W Fuse - 2 A, T class, 250 V Environmental Conditions -Temperature, : 0˚C ~ 50˚C (Operating), -20˚C ~ 60˚C (Storage),- ≤ 90% RH Display Type 7” Colour TFT LCD Display Resolution - 800 X 480 pixels Dimensions (W X H X D) - 301 X 152 X 70 mm Weight - 1.10 Kg Accessories Power Cord, CD, Manual, USB Cable, Probe All the above accessories must be fitted on top of the box fixed to sturdy ABS Box. (Shook proof banana jack terminal (BS-10), BS10 safety terminals are in compliance with IS302-1/IEC60335-1, tested from NABL accredited Lab). Test report from NABL certified lab to be enclosed. "